|
Fiber Patch Cables: In the data centers fiber patch cables carry critical information every day. This means that the cable has to be very robust and reliable for a long period of time. To make sure we meet these standards all fibers cables are made to meet the EIA/TIA standards and in fact some network manufactures use our cables for performance testing. All our fiber patch cords come with the part number and serial number at each end. This can greatly decrease the time to the install since no extra labeling would be needed and can also help resolve issues in the field faster. We offer all the different types of terminations and also make custom lengths for customers within one week. Here is a list of the termination styles, jacket materials, and fiber types available: Termination: LC Uniboot, SC Uniboot, LC, SC, FC, ST, MTRJ, MTP®/MPO (Single mode polishes UPC and APC) Jacket material: Plenum, Riser, and LSZH Fiber types: Laser optimized 10G OM3, OM2 in 50mm and 62.5, Single Mode |
 
|
|
Uniboot Patch Cables: The Uniboot patch cord places both simplex fibers into one jacket while still terminating into a duplex LC or SC connector. Typical fiber optical cables use a zip-cord approach, which means that both fibers are jacketed separately. The typical size of the jacket is 3mm and on a zip cord this would be 6mm in width. With the creative design of the Uniboot now the entire cables is just 3mm which is a space savings of 50%. Termination: LC Uniboot, SC Uniboot Jacket material: Plenum, Riser, and LSZH Fiber types: Laser optimized 10G OM3, OM2 in 50mm and 62.5, Single Mode |
|
|
High Bend Radius Fiber Patch Cables: The bend insensitive fiber is designed to be used in all network installs and fits the FTTH market extremely well. As networks continue to see data rates increase, which decreases the margins of error, bend-induced attenuation will become more of a problem. Thus, Installing Corning® SMF28e® XB fiber will protect your investment now and in the future. For more information on this Corning fiber please click Here. Termination: LC, SC, ST, FC Jacket material: Riser Jacket Thickness: 2mm, 3mm |
|
|
Fiber Trunk Cables: To meet today’s over crowed data centers pulling cable can be problem and many applications need multiple fiber optic cables pulled from and to the same places. This can be a cumbersome task for the high density and high speed data center. To help ease the pain of the engineers, cables installers, and data center managers Total Cable solutions manufactures a multi fiber pre-terminated trunk cable with a pulling eye. Now you can pull up to 144 fibers all at once and still have protection for the terminated ends with pulling eyes. The installation time will be cut down dramatically! We have almost a limitless amount of ways to manufacture the pre-terminated cables to meet your needs. Termination: LC Uniboot, SC Uniboot, LC, SC, FC, ST, MTRJ, MTP®/MPO (Single mode polishes UPC and APC) Jacket material: Plenum, Riser, and LSZH Fiber types: Laser optimized 10G OM3, OM2 in 50mm and 62.5, Single Mode |
|
|
Premium Fiber Patch Panels: TCS has put together the highest quality and feature rich patch panels in the market today. We would gladly put our product up against any premium patch panels. Along with having the number one solution, we still have the best pricing around. Some of our unique features on our 1U patch panel includes a sliding tray that will slide from the front or the back, adjustable brackets for fiber spooling, and cable management on both sides of the adapter. We have partnered with Suncall exclusively for the LC and SC adapters to provide the highest quality connection every time. TCS has worked hard to create the best overall solution in the market and we believe you will not find a better solution anywhere. Available sizes 1U holds up to 3 adapters or Cassettes Specification sheet. 2U holds up to 6 adapters or Cassettes Specification sheet. 3U holds up to 9 adapters or Cassettes Specification sheet. 4U holds up to 12 adapters or Cassettes Specification sheet. |
|
|
Standard Patch Panel: In today’s economy many IT managers need to do more with a smaller budget. TCS has developed a fiber patch panel for this situation. The standard patch panel can accept up to 3 fiber adapter plates or MTP/MPO cassettes. The design also has the feature of cable management on the back side and support for fiber trunk cables. Specification sheet. |
|
|
Wall Mount Fiber Patch Panels: The TCS wall mount fiber distribution enclosures are built to construction grade specifications. Each unit is manufactured with durable steel and coated with a scratch resistant polyester powder coat finish. Units are available in three sizes that fit the most common distribution requirements. Each unit is specifically designed for minimal space requirements. All units support both Patch and Patch/Splice applications. Each unit has two compartments separating the network terminations from the distribution terminations. Units are designed with a single door for improved access. Other additional options available like keyed locks and dual door designs upon request. Available sizes 2 adapters or Cassettes Specification sheet. 4 adapters or Cassettes Specification sheet. 8 adapters or Cassettes Specification sheet. |
|
|
Fiber Adapter Plates: The most critical part of an adapter plate is the optical adapter used. For this reason we have partnered exclusively with Suncall for the LC and SC connectors. Many manufactures use substandard made adapters that break easily and degrade rapidly. Rest assured you are getting the best adapters with Total Cable Solutions. For detailed information please open the Specification sheet. Connector Types Available: LC, SC, ST, FC, MTRJ Fiber types: Single-mode UPC, Single-mode APC, Multimode, Multimode 10G |
|
|
Premium Fiber Adapter Plates: The Premium plates still use Suncall adapters, but with some extra features. The main difference is the addition of shutters on the front of the adapters. The shutters protect from dust entering the adapter and damaging the glass or creating a bad connection. The shutters also keep harmful laser light from accidentally hitting your eye. Further, the adapters have the feature of a stable spring. This helps keep the connector from moving in the metal plate. You typically would only find this feature set with big name manufactures you charge you an arm and leg. For detailed information please open the Specification sheet. Connector Types Available: LC, SC Fiber types: Single-mode UPC, Single-mode APC, Multimode, Multimode 10G |
|
|
MTP/MPO Cassettes: Most cassettes you see on the market are made will very thin steal which make them very flimsy and not able protect the inside components well. We made our MTP/MPO Cassettes with durable .060 gauge aluminum and finished them with a black powder coat. Also to reduce the bend radius on the MTP/MPO cable we placed the connector on the back at an angle. We offer 2 different lines, our standard and premium. The difference between the two is having built in shutters on the front side of the premium Cassettes. The shutters protect from dust entering the adapter and damaging the glass or creating a bad connection. |
|